kostenloser Webspace werbefrei: lima-city

RTL8188S - Linux treiber


  1. Autor dieses Themas


    philip-felder hat kostenlosen Webspace.


    habe mir eine neue Wlan-Karte gekauft. Nur leider klappt es nicht mit Linux! Es ist eine Treiber-CD für Linux vorhanden, weiß aber nicht wie ich das installieren soll :wall:

    Bitte um schnelle Hilfe
    Philip :smile:
  2. Diskutiere mit und stelle Fragen: Jetzt kostenlos anmelden!

    lima-city: Gratis werbefreier Webspace für deine eigene Homepage

  3. Wenn du uns nicht sagst, was auf dieser CD drauf ist, oder was dein Problem beim installieren ist, kann dir hier auch niemand weiterhelfen.

  4. Autor dieses Themas


    philip-felder hat kostenlosen Webspace.

    Das Problem ist nur das ich nicht weiß wie man es installiert :eek:

    Der Inhalt der CD: http://www.fotos-hochladen.net/view/cd8dcne6z3wa.jpg
  5. Schreib mal was inder readme Datei steht. Da steht nämlich auch drin was man tun muss.
    Normalerweise sollte aber auch ein entsprechendes Handbuch oder eine Kurzanleitung beiliegen.
  6. Autor dieses Themas


    philip-felder hat kostenlosen Webspace.

    In der readme steht:

    Release Date: 2009-0825, ver 0003 
    RTL8192SU Linux driver
       --This driver supports RealTek rtl8192SU USB Wireless LAN NIC
         2.6 kernel:
         Fedora Core 2/3/4/5, Debian 3.1, Mandrake 10.2/Mandriva 2006, 
         SUSE 9.3/10.1/10.2, Gentoo 3.1, Ubuntu 7.10/8.04, etc.
         2.4 kernel:
         Redhat 9.0/9.1
    The driver is composed of several parts:
    	1. Firmare to make nic work
               1.1 firmare/RTL8192SU
    	2. Module source code
    	   2.1 ieee80211 
    	   2.2 HAL/rtl8192u
    	   2.3 wpa_supplicant-0.5.10 (User can download the latest version from 
    	       internet also, but it is suggested to use default package contained
    	       in the distribution because there should less compilation issue.)
    	3. Script to build the modules
    	   3.1 Makefile 
    	4. Script to load/unload modules
    	   4.1 wlan0up 
    	   4.2 wlan0down 
    	5. Script and configuration for DHCP
     	   5.1 wlan0dhcp
    	   5.2 ifcfg-wlan0
    	6. Example of supplicant configuration file:
    	   6.1 wpa1.conf
    	7. Script to run wpa_supplicant
    	   7.1 runwpa
    <<Method 1>>
    Runing the scripts accomplish all operations including building up modules 
    from the source code, installing driver to the kernel and starting up the nic.
    	1. Build up the drivers from the source code
    	2. Install the driver to the kernel
              make install
    	3. bring up wlan if nic is not brought up by GUI, such as NetworkManager
    	  ifconfig wlan0 up 
    	  Note: use ifconfig to check whether wlan0 is brought up and use iwconfig to check your wlan interface name, 
                    since it may change wlan0 to wlan1,etc.
    <<Method 2>>
    Or only load the driver module to kernel and start up nic.
    	 1. Build up the drivers from the source code
             2. Copy firmware to /lib/firmware/ or /lib/firmware/(KERNEL_VERSION)/
                cp -rf firmware/RTL8192SU /lib/firmware
                cp -rf firmware/RTL8192SU /lib/firmware/(KERNEL_VERSION)
              Note: This depends on whether (KERNEL_VERSION) subdirectory exists under /lib/firmware
    	 3. Load driver module to kernel and start up nic.
              Note: when "insmod: error inserting 'xxxx.ko': -1 File exists" comes out
                    after run ./wlan0up, please run ./wlan0down first, then it should 
                    be ok..
    	  Note: If you see the message of "unkown symbol" during ./wlan0up, it
    		is suggested to build driver by <<Method 1>>.
    				Set wireless lan MIBs 
    This driver uses Wireless Extension as an interface allowing you to set
    Wireless LAN specific parameters.
    Current driver supports "iwlist" to show the device status of nic
            iwlist wlan0 [parameters]
            parameter explaination      	[parameters]    
            -----------------------     	-------------   
            Show available chan and freq	freq / channel  
            Show and Scan BSS and IBSS 	scan[ning]          
            Show supported bit-rate         rate / bit[rate]        
    For example:
    	iwlist wlan0 channel
    	iwlist wlan0 scan
    	iwlist wlan0 rate
    Driver also supports "iwconfig", manipulate driver private ioctls, to set
    	iwconfig wlan0 [parameters] [val]
    	parameter explaination      [parameters]        [val] constraints
            -----------------------     -------------        ------------------
            Connect to AP by address    ap              	[mac_addr]
            Set the essid, join (I)BSS  essid             	[essid]
            Set operation mode          mode                {Managed|Ad-hoc}
            Set keys and security mode  key/enc[ryption]    {N|open|restricted|off}
    For example:
    	iwconfig wlan0 ap XX:XX:XX:XX:XX:XX
    	iwconfig wlan0 essid "ap_name"
    	iwconfig wlan0 mode Ad-hoc
    	iwconfig wlan0 essid "name" mode Ad-hoc
    	iwconfig wlan0 key 0123456789 [2] open
    	iwconfig wlan0 key off
    	iwconfig wlan0 key restricted [3] 0123456789
            Note: Better to set these MIBS without GUI such as NetworkManager and be sure that our
                  nic has been brought up before these settings. WEP key index 2-4 is not supportted by
    				Getting IP address
    After start up the nic, the network needs to obtain an IP address before
    transmit/receive data.
    This can be done by setting the static IP via "ifconfig wlan0 IP_ADDRESS"
    command, or using DHCP.
    If using DHCP, setting steps is as below:
    	(1)connect to an AP via "iwconfig" settings
    		iwconfig wlan0 essid [name]	or
    		iwconfig wlan0 ap XX:XX:XX:XX:XX:XX
    	(2)run the script which run the dhclient
    		dhcpcd wlan0
                  	(Some network admins require that you use the
                  	hostname and domainname provided by the DHCP server.
                  	In that case, use 
    		dhcpcd -HD wlan0)
    	Wpa_supplicant helps to secure wireless connection with the protection of 
    WPAPSK/WPA2PSK mechanism. 
    	If the version of Wireless Extension in your system is equal or larger than 18, 
    WEXT driver interface is recommended. Otherwise, IPW driver interface is advised.  
    	Note: Wireless Extension is defined us "#define WIRELESS_EXT" in Kernel
    	Note: To check the version of wireless extension, please type "iwconfig -v"
     	If IPW driver interface is used, it us suggested to follow the steps from 1 to 6. 
    If wpa_supplicant has been installed in your system, only steps 5 and 6 are required 
    to be executed for WEXT driver interface.
    	To see detailed description for driver interface and wpa_supplicant, please type
    "man wpa_supplicant".  
    	(1)Download latetest source code for wpa supplicant or use wpa_supplicant-0.5.10 
    	   attached in this package. (It is suggested to use default package contained
               in the distribution because there should less compilation issue.)
    	   Unpack source code of WPA supplicant:
    	  tar -zxvf wpa_supplicant-0.5.10.tar.gz (e.g.) 
    	  cd wpa_supplicant-0.5.10
    	(2)Create .config file:
    	  cp defconfig .config
    	(3)Edit .config file, uncomment the following line if ipw driver interface 
    	   will be applied:
    	(4)Build and install WPA supplicant:
    	  cp wpa_cli wpa_supplicant /usr/local/bin	
    	 1. If make error for lack of <include/md5.h>, install the openssl lib(two ways):
    	  (1) Install the openssl lib from corresponding installation disc:
    	      Fedora Core 2/3/4/5(openssl-0.9.71x-xx), 
    	      Debian 3.1(libssl-dev), Suse 9.3/10.0/10.1(openssl_devl), 
    	      Gentoo(dev-libs/openssl), etc.
    	  (2) Download the openssl open source package from www.openssl.org, build and 
    	      install it.
    	 2. If make errors happen in RedHat(and also Fedora Core) for kssl.h,
    please add lines below into Makefile
    	(5)Edit wpa_supplicant.conf to set up SSID and its passphrase.
    	  For example, the following setting in "wpa1.conf" means SSID 
              to join is "BufAG54_Ch6" and its passphrase is "87654321".
    	   Example 1: Configuration for WPA-PWK
    			#scan_ssid=1 //see note 3
    			pairwise=CCMP TKIP
    			group=CCMP TKIP WEP104 WEP40
    	    Example 2: Configuration for LEAP
    			group=WEP40 WEP104
    	    Example 3: Linking to hidden ssid given AP's security policy exactly.(see note 3 below)
    	    Example 4: Linking to ad-hoc (see note 4 below)
    	Note: 1. proto=WPA for WPA, proto=RSN for WPA2. 
    	      2. If user needs to connect an AP with WPA or WPA2 mixed mode, it is suggested 
    		 to set the cipher of pairwise and group to both CCMP and TKIP unless you 
    		 know exactly which cipher type AP is configured.
    	      3. When connecting to hidden ssid, explicit security policy should be given with 
    		 ap_scan=2 being setting.
    	      4. It is suggested setting ap_scan to 2 and mode to 1 when linking to or creating an ad-hoc. Group and pairwise
    		 cipher type should also be explicit, always with group setting to TKIP or CCMP and pairwise setting
    		 to NONE. Lower version wpa_supplicant may not allow setting group to CCMP with pairwise setting to NONE.
    		 So if any problem, you may try to set both group and pairwise to CCMP, leaving other setting unchanged, when
    	         connecting to an CCMP-encrypted ad-hoc.
    	      5. More config setting option, please refer to wpa_supplicant.conf in wpa_supplicant.tar.gz that we provide.
    	(6)Execute WPA supplicant (Assume rtl8192E and related modules had been
               Note: The script runwpa will check Wireless Extension version automatically.
                     If the version of Wireless Extension is equal or larger than 18, the
                     option of "-D wext" is selected. If the version of Wireless extension
                     is less than 18, the option of "-D ipw" is selected.

    Habe kein Handbuch gefunden, es ist nur das darauf, was ich euch gezeigt habe.
  7. Hallo philip,

    unter folgendem link hast du mal die Lösung http://main.bananas-playground.net/Tutorials/Digitus+150N+RTL8188S.html, ich hoffe es klappt.

    lg bit
  8. Diskutiere mit und stelle Fragen: Jetzt kostenlos anmelden!

    lima-city: Gratis werbefreier Webspace für deine eigene Homepage

Dir gefällt dieses Thema?

Über lima-city

Login zum Webhosting ohne Werbung!