/var/log/boot.msg - Bootlog geht nicht mehr?
lima-city → Forum → Heim-PC → Betriebssysteme
after
bio
boot
byte
cap
checken
checking
drive
driver
dvd
intel
memory
mode
not
order
processor
resume
revision
setting
support
-
Ich habe mal eine Frage. Wenn ich bei mir mein Linuxsystem starte, dann muesste doch eigendlich auch das Bootlogging gestartet werden, oder? Ich habe naemlich folgendes Problem: in meiner boot.msg wird nur bis zu einem bestimmten Punkt geloggt (Resuming Machine). Ab dort fehlen dann die Eintraege (eigendlich fast alle Prozesse sind nicht aufgelistet). Hat jemand eine Idee, woran das liegen kann?
Hier ist mal meine boot.msg:
Inspecting /boot/System.map-2.6.5-7.108-default
Loaded 23748 symbols from /boot/System.map-2.6.5-7.108-default.
Symbols match kernel version 2.6.5.
No module symbols loaded - kernel modules not enabled.
klogd 1.4.1, log source = ksyslog started.
<4>Linux version 2.6.5-7.108-default (geeko@buildhost) (gcc version 3.3.3 (SuSE Linux)) #2 Mon Oct 25 18:18:42 PDT 2004
<6>BIOS-provided physical RAM map:
<4> BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
<4> BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
<4> BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
<4> BIOS-e820: 0000000000100000 - 000000001ffe0000 (usable)
<4> BIOS-e820: 000000001ffe0000 - 0000000020000000 (ACPI NVS)
<4> BIOS-e820: 00000000feda0000 - 0000000100000000 (reserved)
<5>501MB vmalloc/ioremap area available.
<5>0MB HIGHMEM available.
<5>511MB LOWMEM available.
<4>On node 0 totalpages: 131040
<4> DMA zone: 4096 pages, LIFO batch:1
<4> Normal zone: 126944 pages, LIFO batch:16
<4> HighMem zone: 0 pages, LIFO batch:1
<6>DMI 2.3 present.
<6>ACPI: RSDP (v000 COMPAQ ) @ 0x000e9a10
<6>ACPI: RSDT (v001 COMPAQ CPQ003E 0x20011203 0x00000000) @ 0x000e5a40
<6>ACPI: FADT (v001 COMPAQ BROOKDA 0x00000001 0x00000000) @ 0x000e5af0
<6>ACPI: SSDT (v001 COMPAQ CORE_UTL 0x00000001 MSFT 0x0100000d) @ 0x000e6f09
<6>ACPI: SSDT (v001 COMPAQ VILLTBL1 0x00000001 MSFT 0x0100000d) @ 0x000e707d
<6>ACPI: MADT (v001 COMPAQ BROOKDA 0x00000001 0x00000000) @ 0x000e5b64
<6>ACPI: SSDT (v001 COMPAQ APIC 0x00000001 MSFT 0x0100000d) @ 0x000e8cde
<6>ACPI: SSDT (v001 COMPAQ PNP_PRSS 0x00000001 MSFT 0x0100000d) @ 0x000e7d2a
<6>ACPI: SSDT (v001 COMPAQ S3 0x00000001 MSFT 0x0100000d) @ 0x000e8435
<6>ACPI: SSDT (v001 COMPAQ PIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e85d9
<6>ACPI: SSDT (v001 COMPAQ GTF0 0x00000001 MSFT 0x0100000d) @ 0x000e888e
<6>ACPI: SSDT (v001 COMPAQ SIDETM 0x00000001 MSFT 0x0100000d) @ 0x000e8731
<6>ACPI: SSDT (v001 COMPAQ GTF2 0x00000001 MSFT 0x0100000d) @ 0x000e8ab0
<6>ACPI: SSDT (v001 COMPAQ GTF3 0x00000001 MSFT 0x0100000d) @ 0x000e8bc7
<6>ACPI: SSDT (v001 COMPAQ FINIS 0x00000001 MSFT 0x0100000d) @ 0x000e8e3d
<6>ACPI: DSDT (v001 COMPAQ DSDT 0x00000001 MSFT 0x0100000d) @ 0x00000000
<6>ACPI: PM-Timer IO Port: 0xf808
<6>ACPI: local apic disabled
<4>Built 1 zonelists
<4>Kernel command line: root=/dev/hda5 vga=0x31a desktop resume= splash=silent 3
<6>bootsplash: silent mode.
<6>Initializing CPU#0
<4>PID hash table entries: 2048 (order 11: 16384 bytes)
<4>CKRM Initialization
<4>...... Initializing ClassType<taskclass> ........
<4>...... Initializing ClassType<socket_class> ........
<4>CKRM Initialization done
<4>Detected 1595.093 MHz processor.
<6>Using tsc for high-res timesource
<4>Console: colour dummy device 80x25
<6>Memory: 514684k/524160k available (1965k kernel code, 8700k reserved, 690k data, 216k init, 0k highmem)
<4>Checking if this processor honours the WP bit even in supervisor mode... Ok.
<4>Calibrating delay loop... 3137.53 BogoMIPS
<6>Security Scaffold v1.0.0 initialized
<6>SELinux: Disabled at boot.
<6>Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<4>Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<4>Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
<7>CPU: After generic identify, caps: 3febfbff 00000000 00000000 00000000
<7>CPU: After vendor identify, caps: 3febfbff 00000000 00000000 00000000
<6>CPU: Trace cache: 12K uops, L1 D cache: 8K
<6>CPU: L2 cache: 256K
<7>CPU: After all inits, caps: 3febfbff 00000000 00000000 00000080
<6>Intel machine check architecture supported.
<6>Intel machine check reporting enabled on CPU#0.
<6>CPU#0: Intel P4/Xeon Extended MCE MSRs (12) available
<6>CPU#0: Thermal monitoring enabled
<4>CPU: Intel(R) Pentium(R) 4 CPU 1.60GHz stepping 02
<6>Enabling fast FPU save and restore... done.
<6>Enabling unmasked SIMD FPU exception support... done.
<6>Checking 'hlt' instruction... OK.
<6>checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
<6>Looking for DSDT in initrd ...No customized DSDT found in initrd!
<6>Freeing initrd memory: 1132k freed
<6>NET: Registered protocol family 16
<6>PCI: PCI BIOS revision 2.10 entry at 0xebbd7, last bus=2
<6>PCI: Using configuration type 1
<6>mtrr: v2.0 (20020519)
<6>ACPI: Subsystem revision 20040326
<4>ACPI: IRQ9 SCI: Edge set to Level Trigger.
<6>ACPI: Interpreter enabled
<6>ACPI: Using PIC for interrupt routing
<4>ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 14 15)
<4>ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 14 15)
<4>ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 14 15)
<4>ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 14 15) *0, disabled.
<4>ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 14 15)
<6>ACPI: PCI Root Bridge [PCI0] (00:00)
<4>PCI: Probing PCI hardware (bus 00)
<4>Transparent bridge - 0000:00:1e.0
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
<7>ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB_._PRT]
<6>Linux Plug and Play Support v0.97 (c) Adam Belay
<4>ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
<4>ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
<4>ACPI: PCI Interrupt Link [LNKE] enabled at IRQ 5
<6>PCI: Using ACPI for IRQ routing
<6>PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off'
<6>vesafb: framebuffer at 0xf8000000, mapped to 0xe0800000, size 32768k
<6>vesafb: mode is 1280x1024x16, linelength=2560, pages=1
<6>vesafb: protected mode interface info at c000:b7d0
<6>vesafb: scrolling: redraw
<6>vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
<6>fb0: VESA VGA frame buffer device
<6>apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
<5>apm: overridden by ACPI.
<4>Initial HugeTLB pages allocated: 0
<5>VFS: Disk quotas dquot_6.5.1
<6>Initializing Cryptographic API
<6>isapnp: Scanning for PnP cards...
<6>isapnp: No Plug & Play device found
<6> silentjpeg size 52139 bytes,<6>...found (1280x1024, 24562 bytes, v3).
<4>Console: switching to colour frame buffer device 147x55
<6>Real Time Clock Driver v1.12
<6>Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
<4>ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
<4>ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
<4>Using anticipatory io scheduler
<6>Floppy drive(s): fd0 is 1.44M
<6>FDC 0 is a post-1991 82077
<4>RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
<6>loop: loaded (max 8 devices)
<6>Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
<6>ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
<6>ICH2: IDE controller at PCI slot 0000:00:1f.1
<6>ICH2: chipset revision 18
<6>ICH2: not 100%% native mode: will probe irqs later
<6> ide0: BM-DMA at 0x2480-0x2487, BIOS settings: hda:DMA, hdb:pio
<6> ide1: BM-DMA at 0x2488-0x248f, BIOS settings: hdc:DMA, hdd:DMA
<4>hda: Maxtor 4D080H4, ATA DISK drive
<4>ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
<4>hdc: Compaq DVD-ROM DVD-117, ATAPI CD/DVD-ROM drive
<4>hdd: LITE-ON LTR-16102B, ATAPI CD/DVD-ROM drive
<4>ide1 at 0x170-0x177,0x376 on irq 15
<4>hda: max request size: 128KiB
<6>hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
<4>hda: cache flushes not supported
<6> hda: hda1 hda2 < hda5 >
<4>ide-floppy driver 0.99.newide
<6>mice: PS/2 mouse device common for all mice
<6>input: PC Speaker
<6>serio: i8042 AUX port at 0x60,0x64 irq 12
<6>input: ImPS/2 Logitech Wheel Mouse on isa0060/serio1
<6>serio: i8042 KBD port at 0x60,0x64 irq 1
<6>md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
<6>NET: Registered protocol family 2
<6>IP: routing cache hash table of 4096 buckets, 32Kbytes
<6>TCP: Hash tables configured (established 32768 bind 65536)
<6>NET: Registered protocol family 1
<6>NET: Registered protocol family 8
<6>NET: Registered protocol family 20
<4>Resume Machine: suspension device unspecified
<6>ACPI: (supports S0 S1 S3 S4 S5)
Kernel logging (ksyslog) stopped.
Kernel log daemon terminating.
-
Diskutiere mit und stelle Fragen: Jetzt kostenlos anmelden!
lima-city: Gratis werbefreier Webspace für deine eigene Homepage